Zanussi ZZB35901XC Panduan Pengguna - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Oven Zanussi ZZB35901XC. Zanussi ZZB35901XC 25 halaman.
Juga untuk Zanussi ZZB35901XC: Panduan Pengguna (25 halaman)

Halaman Cetak

4. Put the door on a soft cloth on a stable surface.

5. Release the locking system to remove the

internal glass panel.

6. Turn the two fasteners by 90° and remove them

from their seats.

90°

7. First lift carefully and then remove the glass

panel.

8. Clean the glass panel with water and soap. Dry

the glass panel carefully.

When the cleaning is completed, install the glass

panel and the oven door. Do the above steps in the

opposite sequence.

The screen-printing zone must face the inner side

of the door. Make sure that after the installation the

surface of the glass panel frame on the screen-

printing zones is not rough when you touch it.

Make sure that you install the internal glass panel in

the seats correctly.

REPLACING THE LAMP

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

WARNING! Danger of electrocution!

Disconnect the fuse before you

replace the lamp.

The lamp and the lamp glass cover

can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The back lamp

1. Turn the lamp glass cover counterclockwise to

remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300 °C heat-

resistant lamp.

4. Install the glass cover.