Zanussi 132985450 Buklet Instruksi - Halaman 21

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Mesin cuci Zanussi 132985450. Zanussi 132985450 30 halaman. Zanussi washing machine instruction booklet

Halaman Cetak
Zanussi 132985450 Buklet Instruksi
132985450.qxd
18/07/2005
17:47
Symptom
The machine vibrates when spinning
The door will not open
Spinning starts late or the machine
does not spin
The machine makes an unusual
noise
No water is visible in the drum
Service & Spare Parts
In the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact your
local Service Force Centre by telephoning:
0870 5 929929
For the address of your local Service Force Centre and
further information about Service Force, please visit the
website at www.serviceforce.co.uk.
For Customer Service in Ireland please contact us at the
address below:
Zanussi
Electrolux Group (Irl) Ltd
Long Mile Road
Dublin 12
Republic of Ireland
Tel: +353 (0)1 4090751
Pagina
21
Possible causes
The internal packing has not been removed.
●
The machine is in contact with the wall or furniture.
●
The machine is not level.
●
The washing load is badly distributed in the drum.
●
Maybe there is very little laundry in the drum.
●
The water level is above the bottom edge of the door.
●
The machine is heating the water.
●
The drum is turning.
●
The electronic unbalance detection device has cut in because the
●
laundry is not evenly distributed in the drum. The laundry is
redistributed by reverse rotation of the drum. This may happen several
times before the unbalance disappears and normal spinning can resume.
If, after 10 minutes, the laundry is still not evenly distributed in the
drum, the machine will not spin. In this case, redistribute the load
manually and select the spin programme.
The machine is fitted with a type of motor which makes an unusual
●
noise compared with other traditional motors. This new motor ensures
a softer start and more even distribution of the laundry in the drum
when spinning, as well as increased stability of the machine.
Machines based on modern technology operate very economically
●
using very little water without affecting performance.
21
Before calling out an engineer, please ensure you have
read the details under the heading "Something Not
Working".
When you contact the Service Force Centre you will
need to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of fault
4. The model and serial number of the appliance (found
on the rating plate - see picture)
5. The purchase date.