Zanussi F1000 Buklet Instruksi - Halaman 8

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Mesin cuci Zanussi F1000. Zanussi F1000 20 halaman. Washing machine f1000

Halaman Cetak

Use

Control panel

CY LE

1 Mains-on light

This light comes on when the ON/OFF button is

pressed, and goes out when it is pressed again.

2 ON/OFF button

Press this button to switch the machine on after

selecting the programme and the different options.

Press it again to switch the machine off.

3 SPIN REDUCTION button

By depressing this button the spin speed is reduced

as follows:

cotton and linen: from 1000 to 650 r.p.m.

programme SHORT SPIN: from 650 to 450 r.p.m.

4 QUICK WASH button

By depressing this button on cotton programmes

(PREWASH 30° - 95° and COTTONS 30° - 95°) and

synthetic programmes (PREWASH 30° - 60° and

SYNTHETICS 30° - 60°) the washing time will be

reduced by approx. 30 mins for cotton and by 15

mins for synthetics.

Max. recommended temperature 60°C.

To be used for lightly soiled laundry.

PLUS

5 EXTRA RINSE button

By depressing this button on programmes

(COTTONS WITH PREWASH 30°- 95° and

COTTONS 30° - 95°) for cotton and linen the

machine will perform 4 rinses instead of 3.

To be used in areas where the water is very soft or

for people allergic to detergents or who have very

delicate skin.

6 HALF LOAD button

Select this button to reduce water consumption on

the rinse cycle when washing a half load of cottons

or linens.

7 Temperature selector dial

Turn this dial to select the washing temperature.

Position COLD corresponds to a cold wash.

8 Programme selector dial

To select the required programme, turn this dial

clockwise until the pointer on the knob coincides

with the programme desired.

Before selecting a programme or changing a

programme in progress the machine must be

switched off by depressing ON/OFF button.