Zanussi FCS 825C Buklet Instruksi dan Instalasi - Halaman 18

Jelajahi secara online atau unduh pdf Buklet Instruksi dan Instalasi untuk Mesin cuci Zanussi FCS 825C. Zanussi FCS 825C 40 halaman.

Installation

Levelling the machine

The machine must be installed on a sound and

firm surface and must not be touching walls or

furniture. Adjust the two front feet to level the

machine. Make sure the machine is resting on

all four feet (Fig. 1).

Some vibration is normal and unavoidable when

the machine is spinning the load, particularly if

the floor is not a concrete one.

When the appliance location is on

carpet floors, attention must be paid

so as to ensure that there is no

obstruction to the bottom vents.

Water inlet

Connect the inlet hose to a tap with a 3/4" pipe

thread. If necessary, use the restrictor (1/2")

supplied. (Fig. 2).

The inlet hose must not be joined onto any form

of extension hose. If it is too short, the entire hose

must be replaced with a longer high-pressure

hose, specially designed for the purpose.

The machine end of this hose can be turned in

any direction. Loosen the retaining nut, turn the

hose, then retighten the nut (Fig. 3).

Check that the nut is tightend before

the machine is moved into position.

Use only the inlet hose supplied with

the machine, do not reuse the old inlet

hose.

- 18 -