Zanussi FE 1024 N Panduan Pengguna - Halaman 21

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin cuci Zanussi FE 1024 N. Zanussi FE 1024 N 21 halaman. Washing machine fe 925n; fe 1024 n

Halaman Cetak

132992210.qxd

4/7/03

10:29 AM

• The machine vibrates or is noisy:

• The door will not open:

• Spinning starts late or the laundry is

not spun enough:

• The machine makes an unusual noise

• No water is visible in the drum

If you are unable to identify or solve the problem,

contact our service centre. Before telephoning,

make a note of the model, serial number and

purchase date of your machine: the Service Centre

will require this information.

Pagina

(Nero/Process Black pellicola)

Problem

Possible cause

• The transit bolts and packing have not been

removed.

• The support feet have not been adjusted.

• The laundry is not evenly distributed in the drum.

• Maybe there is very little laundry in the drum.

• The machine is in contact with the wall or

furniture.

• The programme is still running, the drum is

turning.

• The door lock has not yet released.

• The water level is above the bottom edge of the door.

• The machine is heating the water.

The door can only be opened when the relevant

light is off.

• The electronic unbalance detection device has cut

in because the laundry is not evenly distributed in

the drum. The laundry is redistributed by reverse

rotation of the drum. This may happen several

times before the unbalance disappears and

normal spinning can resume. If, after 5 minutes,

the laundry is still not evenly distributed in the

drum, the machine will spin at a lower speed or

will not spin. If at the end of the programme the

laundry is not spun enough, redistribute the load

manually and select the spin programme.

• The machine is fitted with a type of motor which

makes an unusual noise compared with other

traditional motors. This new motor ensures a

softer start and more even distribution of the

laundry in the drum when spinning, as well as

increased stability of the machine.

• Machines based on modern technology operate

very economically using very little water without

affecting performance.

Mod. ..........

Prod. No. ...........

Ser. No. .........