Zanussi FI 1073 Buklet Instruksi - Halaman 6

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Mesin cuci Zanussi FI 1073. Zanussi FI 1073 22 halaman. Washing machine fi 873 - fi 1073

Transit devices

All transit bolts and packing must be

removed before using the appliance.

You are advised to keep all transit devices so

that they can be refitted if the machine ever has

to be transported again.

1. Using a spanner, unscrew and remove the

rear right-hand bolt.

2. Lay the machine on its back, taking care not

to squash the hoses. This can be avoided by

placing one of the corner packing pieces

between the machine and the floor.

3. Remove the polystyrene base and take off

the bottom panel by unscrewing the central

screw.

4. Carefully remove the right-hand bag.

5. Carefully slide out the other bags.

6. Re-fit the bottom panel using the 4 screws

supplied with the door hinges (in the plastic

bag) and the previously removed screw.

7. Set the machine upright and remove the two

remaining bolts from the back.

8. Pull out the three plastic pegs from the holes

into which the bolts were fitted.

9. Plug the open holes with the plugs which you

will find on the back of the machine.

INSTALLATION

P0255

P0457

P0016

P0256

P0015

P0453

P0020