Zanussi FJS 1025 W Buklet Instruksi - Halaman 10

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Mesin cuci Zanussi FJS 1025 W. Zanussi FJS 1025 W 29 halaman. Front-load washer

Operating Sequence

Before the first wash, we recommend that you run a

cotton cycle at 60°C, without any laundry in the

machine, to remove any manufacturing residue from the

drum and tub.

Pour 1/2 a measure of detergent into the main wash

compartment of the dispenser drawer and start the

machine.

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

Pull out the dispenser drawer until it stops. Measure out

the amount of detergent required and pour it into the

main wash compartment

If you wish to carry out the prewash, pour detergent into

the appropriate compartment marked

3.Measure out the fabric

softener

If required, pour fabric softener into the compartment

marked

, without exceeding the «MAX» mark.

Close the drawer gently.

Press the ON/OFF button to switch the machine on. The

display will show three blinking dashes or a blinking

zero. The light above the button will light up.

5. Select the desired programme/

fabric

Press the FABRICS button repeatedly, in order to select

the desired programme/fabric. The relevant light will

light up.

The lights relevant to the phases that form the

programme will light up.

The display will show the duration of the selected

programme, calculated on the basis of the maximum

load for each type of fabric. The START/PAUSE button

light will start flashing.

If the load of laundry to be washed is small, at the

beginning of the cycle the display will still indicate the

duration relevant to the maximum load. The duration

value will be gradually adjusted during the execution of

the cycle.