Zanussi FL 908 Buklet Instruksi - Halaman 11
Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Mesin cuci Zanussi FL 908. Zanussi FL 908 23 halaman. Front-loading washing machine
Halaman Cetak
To restart the programme from the point at which it
was interrupted, press the START/PAUSE button
again.
6 "SPIN REDUCTION" button
By depressing this button you can reduce the final
spin speed proposed by the machine or select the
"WET ANTI-ARRUGAS" (Rinse Hold) option. The
relevant light illuminates.
The maximum speeds are:
Models FL 708 - FL 708ALU
for cotton, synthetics, hand wash and wool: 750
r.p.m.
for delicate fabrics: 600 r.p.m.
Model FL 908
for cotton, synthetics, hand wash and wool: 900
r.p.m.
for delicate fabrics: 500 r.p.m.
Model FL 1108
for cotton: 1100 r.p.m.
for synthetics, hand wash, wool and delicate
fabrics: 700 r.p.m.
When selecting WET ANTI-ARRUGAS (Rinse Hold)
option, the water of the last rinse is not emptied out,
to prevent the fabrics from creasing.
At the end of the programme the pilot light "FIN"
(END) illuminates and the "WET ANTI-ARRUGAS"
light stays on. To drain water, proceed as follows:
turn the programme selector dial to position "O" to
switch the machine off;
select programme
(drain) or
press START/PAUSE button.
The light "LAVADO" comes on during the drain or
the spin programme. At the end of the programme
the light "FIN" illuminates again.
7 Programme display
When you select the programme, the light
corresponding to the selected speed or the WET
ANTI-ARRUGAS option lights up.
SPIN SPEED LIGHTS: are on during the washing
programme and remain alight at the end of the cycle.
FL 708
WET ANTI-ARRUGAS: If you have chosen this
option, the light WET ANTI-ARRUGAS will stay on
during washing together with LAVADO light and at
the end of the programme it will remain lit.
LAVADO: when this light comes on this means that
the machine is performing the washing programme.
If you have selected the PREWASH function, this
light will be on during the prewash phase too.
FIN: when the programme has finished, the "FIN"
(END) pilot light comes on.
The "FIN" (END) light flashes in the event of
operating problems :
4 flashes: door open
2 flashes: problem with water draining
1 flash: problem with water supply
For more information see paragraph "Something not
working"?
7 Programme selector dial
The selector is divided into 5 sections:
• Cotton
• Synthetic
• Hand wash / Delicate
• Wool
• Special programmes
O Reset programme/OFF
(short spin);
The selector dial can be turned either clockwise or
anticlockwise.
Position 60E corresponds to the ENERGY SAVING
programme and position
At the end of the programme the selector dial
must be turned to position "O" to switch the
machine off.
Attention!
If during a washing programme the selector dial is
turned to another programme, the pilot lights of the
programme progress display start to flash. The
machine will not perform the new selected
programme.
11
to "cold wash".