Zanussi FL1001 Buklet Instruksi - Halaman 27

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Mesin cuci Zanussi FL1001. Zanussi FL1001 27 halaman. Washing machine

Problem

• The door will not open:

• Spinning starts late or the

laundry is not spun enough:

• Water is not visible in the

machine:

• The machine makes an unusual

noise:

If you are unable to identify or solve the problem,

contact our service centre. Before telephoning, make

a note of the model, serial number and purchase

date of your machine: the Service Centre will require

this information.

Possible cause

• The water level is above the bottom edge of the door.

• The machine is heating the water.

• The drum is turning.

The door can only be opened when the relevant

light has gone out.

• The electronic unbalance detection device has cut

in because the laundry is not evenly distributed in

the drum. The laundry is redistributed by reverse

rotation of the drum. This may happen several

times before the unbalance disappears and normal

spinning can resume. If, after 6 minutes, the

laundry is still not evenly distributed in the drum,

the machine will spin at a lower speed. If at the end

of the programme the laundry is not spun enough,

redistribute the load manually and select the spin

programme.

• The machine, which is the result of modern

technology, runs in a very economical way with low

water consumption. Performance is nevertheless

excellent.

• The machine is fitted with a commutator motor

which improves machine performance.

P0042