Zanussi ZWQ 5100 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin cuci Zanussi ZWQ 5100. Zanussi ZWQ 5100 13 halaman. Top-loading washing machine
Juga untuk Zanussi ZWQ 5100: Panduan Pengguna (13 halaman)

Halaman Cetak

Water inlet filters

To clean, proceed as follows :

Operating Problems

Numerous checks were carried out on your appliance be-

fore it left the factory. However, should you notice a mal-

Problems

The washing machine

doesn't start or doesn't fill:

The appliance fills but emp-

ties straight away:

The washing machine

doesn't rinse or doesn't emp-

ty:

You have found water around

the washing machine:

Wash is unsatisfactory:

• the appliance isn't plugged in correctly, the electrical installation isn't working,

there is a power failure,

• the lid of your appliance and the drum shutters aren't closed firmly,

• the programme start command hasn't been properly selected,

• the water supply has been cut off, the water inlet tap is closed,

• the water inlet filters are dirty,

• a red tab appears on the water inlet hose.

• the drainage U-piece is fixed too low (see installation section).

• the drain hose is blocked or bent,

• the object trap is obstructed,

• the out of balance detector has been activated : washing is unevenly distributed

in the drum,

• the "Drain" programme or "Night Silence Plus" or "Rinse hold" option have been

selected,

• the height of the drainage U-piece is unsuitable.

• too much detergent has caused foam to overflow,

• the detergent is unsuitable for machine washing,

• the drainage U-piece isn't attached correctly,

• the water inlet hose is leaking.

• the detergent is unsuitable for machine washing,

• there is too much washing in the drum,

• the wash cycle is unsuitable,

• there isn't enough detergent.

function, please refer to the sections below before con-

tacting the after-sales service.

Causes