Zanussi ZWS 568 Panduan Pengguna - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin cuci Zanussi ZWS 568. Zanussi ZWS 568 24 halaman. Front-loading washing machine

Replace the filter into the pump paying attention to in-

sert it properly. When done, screw it firmly.

Place a bowl with a small

edge close to the pump to

collect any spillage.

Pull out the emergency

emptying cap from the fil-

ter cover, using a pliers.

When no more water

comes out, unscrew the

pump cover, using a pli-

ers, and remove the filter.

Always keep a rag nearby

to dry up spillage of water

when removing the cover.

Remove any objects from

the pump impeller by ro-

tating it.

Warning! When the appliance is in use and

depending on the programme selected there can be

hot water in the pump. Never remove the pump cover

during a wash cycle, always wait until the appliance has

finished the cycle, and is empty. When replacing the

cover, ensure it is securely re-tightened so as to stop leaks

and young children being able to remove it.

Cleaning the water inlet filters

Important! If the appliance doesn't fill, takes long to fill

with water, the starting button blinks yellow or the display

(if available) shows the relevant alarm (see chapter "What

to do if..." for more details), check if the water inlet filters

are blocked .

To clean the water inlet filters:

• Screw the hose back onto the tap. Make sure the

connection is tight.

Replace the emergency

emptying cap into the filter

cover and fix it firmly.

Close the pump door.

• Turn off the water tap.

• Unscrew the hose from

the tap.

• Clean the filter in the

hose with a stiff brush.