Zanussi DS 15 TCR/A Petunjuk Penggunaan dan Perawatan - Halaman 24

Jelajahi secara online atau unduh pdf Petunjuk Penggunaan dan Perawatan untuk Mesin pencuci piring Zanussi DS 15 TCR/A. Zanussi DS 15 TCR/A 30 halaman. Dishwasher zanussi
Juga untuk Zanussi DS 15 TCR/A: Petunjuk Penggunaan dan Manual Perawatan (30 halaman), Petunjuk Penggunaan dan Manual Perawatan (30 halaman)

Cleaning the Spray Arm Nozzles

The holes in the spray arm nozzles must

be kept free of scraps for the efficiency of

the washing action. Inspect the spray

arms regularly. When thorough cleaning is

necessary remove the bottom spray arm

by releasing it from its securing catches

and pulling it out (see fig. 20).

Wash the spray arm in hot sudsy water,

using a stiff saucepan brush if necessary

to remove scraps. Reassemble carefully,

making sure the catches are secure.

To clean the top spray arm and nozzles,

slide out the top basket, then unhook the

spray arm from the central support (see

fig. 18).

Remove and wash the parts as above.

Reassemble the parts carefully.

Cleaning the Cabinet

Wipe the outside of the cabinet and

control panel regularly with a soft damp

cloth. Wien necessary use a liquid kitchen

or household cleaner to remove bad

marks, rinse with a damp cloth and rub up

with a soft duster. Never use abrasive

cleaners which could damage the surface.

Care should be taken when cleaning the

bottom door seal and hinge area as any

exposed metal edges may cut if care is

not observed.

If the machine is not going to be used

for some time take the following

precautions:

Unplug the machine and turn off the

water supply.

Fill up the rinse aid container.

Make sure that the tub is clean by

carrying out the Rinse and Hold

programme and then dry the inside

thoroughly.

Leave the door ajar.