Zanussi ZDTL 200 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin pencuci piring Zanussi ZDTL 200. Zanussi ZDTL 200 28 halaman. Dishwasher zdtl 200

Setting the water softener manually (see table)

Setting the water softener

electronically (see table)

1. Press the On/Off button. The appliance

must be in setting mode.

2. Press and hold Programme selection/

Cancel button until programme light A

flashes and programme light B illuminates

with fixed light.

3. After a few seconds:

– programme light B turns off

– programme light A goes on flashing

– End of programme light starts flashing:

the number of flashes corresponds to

Use of dishwasher salt

CAUTION!

Use only special salt suitable for dishwashers.

Set switch to position 1 or

The water softener is factory set at position 2.

current level set. The flashing is repea-

ted with a pause of a few seconds.

Examples: 5 flashes, pause, 5 flashes,

pause, etc... = level 5.

4. To change the level, press the Programme

selection/Cancel button. Each time the

button is pressed the level increases (level

1 follows level 10). The End of pro-

gramme light indicates the new setting.

5. To memorise the operation, switch off the

dishwasher.