Zanussi ZDTS300 Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin pencuci piring Zanussi ZDTS300. Zanussi ZDTS300 28 halaman.
Halaman Cetak
1
On/Off button
2
Programme selection buttons
3
Delay start button
4
Indicator lights
5
Function buttons
Functions buttons
In addition to the dishwashing programme se-
lection, the following functions can also be set
with the help of these buttons:
• the setting of the water softener,
• deactivation/activation of the audible sig-
nals.
Setting mode
IMPORTANT!
Always remember that when:
– setting the water softener,
– deactivation/activation of the audible sig-
nals,
Salt
Rinse aid
End of programme
the appliance MUST be in setting mode:
• Press On/Off button, All programme light are
illuminated = the appliance is in setting
mode.
• Press On/Off button, ONLY a programme
button is illuminated = last performed or se-
lected programme still set.
In this case, to return to setting mode, the
programme has to be cancelled.
To cancel a set programme or a programme
in progress
Simultaneously press function buttons B and
C, until ALL programme button lights are illu-
minated. The programme has been cancelled
and the machine is now in setting mode.
Indicator lights
Illuminates when the special salt has run out.
Is never illuminated while a washing programme is
running.
Illuminates when the rinse aid has run out.
Is never illuminated while a washing programme is
running.
Illuminates when the washing programme has ended.
It also has added functions of visual signalling as:
– the setting of the water softener,
– deactivation/activation of the audible signals,
– intervention of an alarm due to the malfunction of
the machine.
5