Zanussi ZSF 6161 S Panduan Pengguna - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin pencuci piring Zanussi ZSF 6161 S. Zanussi ZSF 6161 S 28 halaman.

The dishes are not clean

The dishes are wet and dull

There are streaks, milky spots or a bluish coating on

glasses and dishes

Water drops have dries onto glasses and dishes

If after all these checks, the problem persists,

contact your local Service Force Centre.

Technical data

Dimensions

Electrical connection

Voltage - Overall power - Fuse

Water supply pressure

Capacity

The wash results are not satisfactory

• The wrong washing programme has been selected.

• The dishes are arranged in such a way as to stop

• The spray arms do not rotate freely due to incorrect

• The filters in the base of the washing compartment

• Too little or no detergent has been used.

• Where there are limescales deposits on the dishes;

• The drain hose connection is not correct.

• The salt container cap is not properly closed.

• Rinse aid was not used.

• The rinse aid dispenser is empty.

• Decrease rinse aid dosing.

• Increase rinse aid dosing.

• The detergent may be the cause. Contact the de-

Width x Height x Depth (cm)

Information on the electrical connection is given on the rating plate on the

inner edge of the dishwasher's door.

Minimum - Maximum

place settings

water reaching all parts of the surface. The baskets

must not be overloaded.

arrangement of the load.

are dirty or incorrectly positioned.

the salt container is empty or the incorrect level of

the water softener has been set.

tergent manufacturer's consumer care line.

60,0 x 85,0 x 63,5

0,05 MPa - 0,8 MPa

(0,5 bar - 8 bar)