Zanussi ZEE6940 Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kompor Zanussi ZEE6940. Zanussi ZEE6940 16 halaman. Product manaul
Juga untuk Zanussi ZEE6940: Panduan Pengguna (36 halaman), Panduan Pengguna (48 halaman), Panduan Pengguna (40 halaman), Panduan Pengguna (12 halaman)
Halaman Cetak
Product description
Cooking surface layout
1
180
mm
145
6
mm
5
Electric cooking zones control knobs
Symbol
0
Daily use
Warning! Refer to the Safety chapters.
To switch on and increase the heat setting turn
the knob counterclockwise. To decrease the
heat setting turn the knob clockwise. To switch
off turn the knob to the 0.
Power indicator is activated when either of the
zones are turned on, and will stay on until the
cooking zones are switched off.
Before first use
Put cookware containing water on each cook-
ing zone, set the maximum position and operate
the appliance for 10 min. This is to burn off the
residue in the appliance. After that, operate the
appliance at minimum position for 20 min. Dur-
Helpful hints and tips
Warning! Refer to the Safety chapters.
Cookware
www.zanussi.com
2
180
mm
145
3
mm
4
Function
off position
Cooking zone 2000 W
1
Cooking zone 2000 W
2
Cooking zone 1500 W
3
Control knobs
4
Power indicator
5
Cooking zone 1500 W
6
Symbol
1
6
ing this period, an odour and smoke can occur.
This is normal. Make sure that the airflow is suf-
ficient.
After this operation, clean the appliance with a
soft cloth soaked in warm water.
Rapid hot plate
A red dot in the middle of the plate shows a
rapid hot plate. A rapid hot plate heats up faster
than usual plates.
The red dot is painted on the surface and can
come off after some time. It does not have an
effect on the performance of the appliance.
The rapid hot plate can smoke and make an
odour when you use it for the first time. The
smoke and an odour will go off after a while.
The bottom of the cookware must be as
thick and flat as possible.
Function
minimum heat
maximum heat
5