Zanussi ZEE6940 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kompor Zanussi ZEE6940. Zanussi ZEE6940 16 halaman. Product manaul
Juga untuk Zanussi ZEE6940: Panduan Pengguna (36 halaman), Panduan Pengguna (48 halaman), Panduan Pengguna (40 halaman), Panduan Pengguna (12 halaman)

Halaman Cetak

If there is a fault, first try to find a solution to the

problem yourself. If you cannot find a solution to

the problem yourself, speak your dealer or the

local Service Force Centre.

If you operated the appliance incorrectly,

or the installation was not carried out by a

registered engineer, the visit from the customer

service technician or dealer may not take place

free of charge, even during the warranty period.

These data are necessary to help you

quickly and correctly. These data are

available on the supplied rating plate.

• Model description .................

MOD.

PROD.NO.

SER.NO

DATA

MODEL

Stick it on Guarantee Card and send this

part

Stick it on Guarantee Card and keep this

part

Installation

Warning! Refer to the Safety chapters.

Important safety requirements

Install the hob accordingly to the IEE Wiring

Regulations (Current Edition).

For appliances installed in the Republic of Ire-

land please refer to the ETCI Rules for Electri-

cal Installations.

Detailed recommendations are contained in the

British Standards Codes Of Practice: B.S.

MOD.

PROD.NO.

SER.NO

03 IT

DATA

MADE IN ITALY

MODEL

• Product number (PNC) .................

• Serial Number (S.N.) .................

Use the original spare parts only. They are

available at Service Force Centre and approved

spare parts shops.

Labels supplied with the accessories bag

Stick the adhesive labels as indicated below:

MOD.

PROD.NO.

0049

SER.NO.

Stick it on instruction booklet

6172/ B.S. 5440, Par. 2 and B.S. 6891 Cur-

rent Editions.

Location

The appliance is of the type X and it has to be

assembled in or adjacent to furniture according

to the regulations in force (I.E.C. 335.2.6).

Make sure that there is a minimum distance of

55 mm between the rear cut out edge and the

wall.

TYPE

230V-50Hz

IP20