Califone PA920PS Panduan Pemilik - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pembicara Califone PA920PS. Califone PA920PS 13 halaman. Powerpro portable pa
Halaman Cetak
Radio frequency
successfully matching
to wireles mic
SET button -
Syncs wireless
channel with mic
Wireless UHF Receiver
Selecting a Wireless Channel
• Turn the receiver power ON
• Hold down the Set button until the display starts flashing
• Use the UP and Down buttons to select the desired channel
• Depress the Set button to save it.
There are two (2) LEDs on the receiver; RF reception (green) and AF Audio reception (blue). There are
also LEDs on the front of the speaker above the grille making it easy to see if the receiver is working properly.
A red LED indicates RF (radio frequency) from the transmitter/mic while an amber LED indicates audio.
The green LED shows power status for the PA system.
Feedback
Feedback is a shrill screeching sound produced by the speaker system when a microphone is being
used too close to the front of the speaker. The microphone picks up the sound of the speaker system
and it becomes reamplified. It is a self-sustaining loop which can damage the system if allowed to
continue, not to mention the annoyance caused to persons nearby. Always stand 4 to 6 feet from the
speaker to minimize the opportunity for feedback from the speaker system.
Wireless Operation
SET/SYNC
RF
AF
H
UHF
TRANSMITTER
MIC 1
MIC 2
MIN
MAX
MIN
P U SH
6
Wireless mic channel
selected
p
ON
MAX
PLL
16CH RECEIVER
Audio frequency
successfully matching
to wireless mic
L
ON
MAX
LINE IN
MAX
MIN
MAX
PUS H
SPEECH
Channel up /down
SET/SYNC
RF
AF
Power On/Off &
volume control
STOP
DOWN/REV UP/CUE PLAY/PA
— FOLDER SKIP —
REMOTE
BLUETOOTH RE
PAIR
DISC/BT
BASS
MIN
MAX
LO
SPEECH
US