Zanussi ZGF 786 ICX Panduan Pengoperasian dan Instalasi - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Instalasi untuk Kompor Zanussi ZGF 786 ICX. Zanussi ZGF 786 ICX 13 halaman.
Juga untuk Zanussi ZGF 786 ICX: Buklet Instruksi (11 halaman)
Halaman Cetak
INSTALLATION AND ASSEMBLY
These hobs can be installed in a kitchen unit with an
opening for insertion whose dimensions are shown in
Fig. 16.
The edge of the cut out must have a minimum distance
from the rear wall of 55 mm.
If there are side walls, or sides of the furniture unit near
the hob, the cut out edges must have a minimum
distance of 150 mm.
Carry out the building in of the hob as follows:
•
put the relevant sealings, supplied with the hob, on
the edges of the cut out: place them exactly on the
front and rear edge and at 50 mm. from the side
edges, as shown in Fig. 17, taking care that the
sealings meet without overlapping;
•
place the hob in the cut out, taking care of its
centring;
•
fix the hob with the relevant screws (Fig. 18). The
traction of the screws is able to trace the sealing, any
excess of which can then be easily removed.
The edge of the hob forms a double labyrinth seal
which provides a total guarantee against infiltration of
liquids.
12
FO 2038
50
FO 2039
FO 0199
a) sealing
560
150 min
Fig. 16
50
Fig. 17
a
Fig. 18