Zanussi ZGG 743 EX Buklet Instruksi - Halaman 27

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Kompor Zanussi ZGG 743 EX. Zanussi ZGG 743 EX 39 halaman. Electronic gas hob

diameter and lenght of the tube in front

and behind the meter;

section of transit of variuos tubes

positioned on the circuit;

diameter of eventual connections.

IMPORTANT

operation, a saving of energy and the long-

life of the appliance, the voltage pressure

of the appliance must correspond to the

recommended values.

The adjustable connection is fixed to the

comprehensive ramp by means of a

threaded nut G 1/2".

All the components shown in the diagram

have already been assembled in the factory.

The appliance, before leaving the factory,

has been tested in order to give you the

best results.

Connection

Carry out connection to the gas supply using

a rigid metal pipe with connections

conforming to the rules in force, or with a

flexible s/steel tube conforming to the

relevant rules in force, limited to those

whose max. length is 2 m. If flexible metal

tubes are used, make sure they do not

come into contact with mobile parts or are

crushed. Pay the same attention also when

an oven and top combination is provided for.

The appliance gas inlet connection is 1/2"

cylindrical threaded male. Carry out

connection avoiding any kind of stress to

the appliance.

IMPORTANT: After installation,

always

tightness of all the connections,

using a soapy solution.

NEVER carry out this check with

a flame.

To ensure a correct

check

the

perfect

A) Gas ramp end with nut

B) Washer

C) Elbow