Zanussi ZGH62414XS Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kompor Zanussi ZGH62414XS. Zanussi ZGH62414XS 16 halaman.
Juga untuk Zanussi ZGH62414XS: Panduan Pengguna (21 halaman)

Halaman Cetak

• Before carrying out any operation make sure

that the appliance is disconnected from the

power supply.

• Make sure that the electrical information on

the rating plate agrees with the power

supply. If not, contact an electrician.

• Make sure the appliance is installed

correctly. Loose and incorrect electricity

mains cable or plug (if applicable) can make

the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot appliance

or hot cookware, when you connect the

appliance to the near sockets

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug (if applicable) or to the mains

cable. Contact our Authorised Service

Centre or an electrician to change a

damaged mains cable.

• The shock protection of live and insulated

parts must be fastened in such a way that it

cannot be removed without tools.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure

that there is access to the mains plug after

the installation.

• If the mains socket is loose, do not connect

the mains plug.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type fuses

removed from the holder), earth leakage trips

and contactors.

• The electrical installation must have an

isolation device which lets you disconnect

the appliance from the mains at all poles.

The isolation device must have a contact

opening width of minimum 3 mm.

Gas connection

• All gas connections should be made by a

qualified person.

• Before installation, make sure that the local

distribution conditions (nature of the gas and

gas pressure) and the adjustment of the

appliance are compatible.

• Make sure that there is air circulation around

the appliance.

• The information about the gas supply is on

the rating plate.

• This appliance is not connected to a device,

which evacuates the products of

combustion. Make sure to connect the

appliance according to current installation

regulations. Pay attention to requirements

regarding adequate ventilation.

Use

WARNING!

Risk of injury, burns and electrical

shock.

• Remove all the packaging, labelling and

protective film (if applicable) before first use.

• Use this appliance in a household

environment.

• Do not change the specification of this

appliance.

• Make sure that the ventilation openings are

not blocked.

• Do not let the appliance stay unattended

during operation.

• Set the cooking zone to "off" after each use.

• Do not put cutlery or saucepan lids on the

cooking zones. They can become hot.

• Do not operate the appliance with wet hands

or when it has contact with water.

• Do not use the appliance as a work surface

or as a storage surface.

• When you place food into hot oil, it may

splash.

WARNING!

Risk of fire and explosion

• Fats and oil when heated can release

flammable vapours. Keep flames or heated

objects away from fats and oils when you

cook with them.

• The vapours that very hot oil releases can

cause spontaneous combustion.

• Used oil, that can contain food remnants,

can cause fire at a lower temperature than

oil used for the first time.

• Do not put flammable products or items that

are wet with flammable products in, near or

on the appliance.

WARNING!

Risk of damage to the appliance.

• Do not keep hot cookware on the control

panel.