Zanussi ZGX65424XA Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kompor Zanussi ZGX65424XA. Zanussi ZGX65424XA 20 halaman. Hob

Halaman Cetak

Warning! Always turn the flame down or

switch it off before you remove the pans

from the burner.

Helpful hints and tips

Warning! Refer to the Safety chapters.

Energy savings

• If possible, always put the lids on the pans.

• When the liquid starts to boil, turn down the

flame to barely simmer the liquid.

Warning! Use cookware with diameters

applicable to the size of burners.

Burner

Triple Crown

Semi-rapid (left)

Semi-rapid

(rear)

Auxiliary

Warning! Make sure that the bottoms of

pots do not stand above the control knobs.

If the control knobs are under the bottoms of

pots, the flame heats them up.

Care and cleaning

Warning! Refer to the Safety chapters.

Warning! Deactivate the appliance and let

it cool down before you clean it.

Disconnect the appliance from the electrical

supply before you do cleaning or maintenance

work.

Scratches or dark stains on the surface

have no effect on how the appliance oper-

ates.

• You can remove the pan supports to easily

clean the hob.

• To clean the enamelled parts, cap and crown,

wash them with warm soapy water and dry

them carefully before you put them back.

• Wash stainless steel parts with water, and

then dry them with a soft cloth.

www.zanussi.com

Diameters of cookware

220 - 260 mm

140 - 180 mm

140 - 160 mm

Do not put the same pan on two burners.

Warning! Make sure that pot handles is

not above the front edge of the cooktop.

Make sure that pots are centrally put on the

rings in order to get maximum stability and to

get lower gas consumption.

Do not put unstable or damaged pots on the

rings to prevent from spill and injury.

Warning! Do not use a flame diffuser.

• The pan supports are not dishwasher proof.

They must be washed by hand.

• The enamel coating occasionally can have

rough edges, so be careful when you wash

the pan supports by hand and dry them. If

necessary, remove stubborn stains with a

paste cleaner.

• Make sure you position the pan supports cor-

rectly after cleaning.

• To make the burners work correctly, make

sure that the arms of the pan supports are in

the centre of the burner.