Zanussi ZHRN642K Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kompor Zanussi ZHRN642K. Zanussi ZHRN642K 41 halaman.

Halaman Cetak

Problem

An acoustic signal sounds and

the hob deactivates.

An acoustic signal sounds

when the hob is deactivated.

The hob deactivates.

Residual heat indicator does

not come on.

You cannot activate the outer

ring.

There is a dark area on

the multiple zone.

The sensor fields become hot.

comes on.

and a number come on.

You can hear a constant beep

noise.

comes on.

IF YOU CANNOT FIND A SOLUTION...

If you cannot find a solution to the problem yourself,

contact your dealer or an Authorised Service

Possible cause

You touched 2 or more sensor

fields at the same time.

There is water or fat stains on

the control panel.

You put something on one or

more sensor fields.

You put something on the sen-

sor field

The zone is not hot because it

operated only for a short time

or the sensor is damaged.

It is normal that there is a dark

area on the multiple zone.

The cookware is too large or

you put it too near to the con-

trols.

Child Safety Device operates.

There is an error in the hob.

The electrical connection is in-

correct.

The second phase of the pow-

er supply is missing.

Centre. Give the data from the rating plate. Give

also three digit letter code for the glass ceramic (it

is in the corner of the glass surface) and an error

Remedy

Touch only one sensor field.

Clean the control panel.

Remove the object from the

sensor fields.

Remove the object from the

sensor field.

If the zone operated sufficiently

long to be hot, speak to an Au-

thorised Service Centre.

First, activate the inner ring by

changing the heat setting.

Put large cookware on the rear

zones, if possible.

Refer to "Daily use".

Deactivate the hob and acti-

vate it again after 30 seconds.

comes on again, discon-

nect the hob from the electrical

supply. After 30 seconds, con-

nect the hob again. If the prob-

lem continues, speak to an Au-

thorised Service Centre.

Disconnect the hob from the

electrical supply. Ask a quali-

fied electrician to check the in-

stallation.

Check if the hob is correctly

connected to the electrical

supply. Remove the fuse, wait

one minute, and insert the fuse

again.