Zanussi ZKL 850 LX Panduan Petunjuk Pengoperasian - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Kompor Zanussi ZKL 850 LX. Zanussi ZKL 850 LX 18 halaman. Ceramic built-in hob
Juga untuk Zanussi ZKL 850 LX: Panduan Petunjuk Pengoperasian (18 halaman)
Halaman Cetak
When the cooking zones are switched on, they
may hum briefly. This is a characteristic of all
ceramic glass cooking zones and does not im-
pair either the function or the life of the applian-
ce.
The control knob is used to set the required heat output
continuously from 1–10.
It can be turned to the right or left.
When you turn the regulator back to the zero position,
the cooking zone will be switched off.
On the double circuit cooking zones only the inner hea-
ting circuit is switched on first.
If you want to heat the whole zone, you will have to turn
the rotary switch slightly past position «10» to the point
where it automatically springs back to position «10».
An indicator is assigned to each cooking zone. This il-
luminates as soon as the corresponding cooking zone
becomes hot and warns against inadvertent touching.
Important! As long as the residual heat indica-
tor is illuminated, there is a risk of burns.
Even after the cooking zone is switched off, the corres-
ponding residual heat indicator will remain on until the
cooking zone is cold.
You can use the residual heat for melting and
keeping food warm.
Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó
Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó
Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó
Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó
Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó
Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó
Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó
Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó
53