Zanussi ZKT 630 D Buku Instruksi - Halaman 7

Jelajahi secara online atau unduh pdf Buku Instruksi untuk Kompor Zanussi ZKT 630 D. Zanussi ZKT 630 D 22 halaman. Glass ceramic induction hob

Halaman Cetak

Control panel

Displays of the cooking zones

Cooking zone selection

The Digital Displays

Digits 1 to 9 and four different letters can appear in

the display.

• The digits show the cooking stage set:

1 = Lowest capacity

9 = Highest capacity

• The following letters and functions are displayed

for all cooking zones:

H = Residual Heat Display

Danger! Cooking zone still hot; it extinguis-

hes when the cooking zone has cooled

down. This display appears only if the coo-

king zone is switched off.

a = Automatic heating-up (possible for all

cooking zones)

is lit, if the cooking zone is set to automatic

heating-up; (is lit until the automatic feature

switches over to the set continued cooking

stage).

- = Lights up when the automatic switch-off

function has been activated (also see "What

to do if ...?").

• The following letters and functions are displayed

only for with the two induction cooking zones.

f = Error display

flashes if the cooking zone is activated and

F =

– no pan is on the cooking zone or

F =

– unsuitable pots and pans are used

P = Power function

lights up when the Power function is activa-

ted.

Heat Setting controller +

Power/ double ring coo-

king zone activation

Cooking Zone Safety Switch

• Cooking stage 1 - 2 after 6 hours

• Cooking stage 3 - 4 after 5 hours

• Cooking stage 4 - 5 after 4 hours

• Cooking stage 5 - 9 after 1.5 hours

Resetting the Safety Cut-Off

To cancel the active safety switch-off function of the

relevant cooking zones, switch off the unit with the

"On/Off" sensor field n and then switch it back on

again. The cooking zones are then ready for use

again.

ITimer display

Timer

Heat Setting regula-

tor -

The Power function supplies extra-high hea-

ting capacity. It can be activated for cooking

zone 1 at the front left ø 210 mm.

If one of the cooking zones is not switched

off after a certain time or if the cooking stage

is not changed, the corresponding cooking

zone switches itself off automatically.

j appears in the display of the relevant

cooking zone.

The cooking zones switch themselves off

at:

h appears in the display of the cooking

zone if there is still residual heat.

Locking key

Locking indicator

lamp

Indicator lamp for

timer cooking

zone selection

"On/Off" sensor

key