Zanussi ZC240F Buklet Instruksi - Halaman 5

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Pembeku Zanussi ZC240F. Zanussi ZC240F 10 halaman. Freezer zc240f

Halaman Cetak

Changing the opening direction of the door

Unplug the freezer before performing the following

operations:

Remove the ventilation grill (D-Fig. 2).

Unscrew the bottom hinge (E-Fig. 2).

D071

Remove the door from the upper pivot (A-Fig. 3).

Remove the pivot and the washer (A+B-Fig. 3)

from the upper hinge (C), then mount these on the

opposite side.

D427

Re-assemble the door.

Screw down the bottom hinge (E-Fig. 2) on the

opposite side by using the screws previously

removed.

Detach the plug (F-Fig. 2) from the ventilation grill

(D). To do this, press it in the direction of the arrow.

Introduce the plug (G), which is delivered with the

appliance, into the hole left free on the opposite side.

Re-assemble the ventilation grill.

Fig. 2

Fig. 3

Reverse the direction of the handle.

The unused opening direction is concealed by plastic

plugs. Therefore, these plugs are to be mounted on

the holes left free.

D162

If, after having reversed the door, it is not in line

with the unit, the top hinge can be adjusted.

To do this, use a 10 mm spanner as shown in Fig. 3;

slacken the nut, align the door by pushing it to the

left or right, then re-tighten the nut.

Attention

After completion of the door reversibility operation,

verify that the door gasket is adherent to the

cabinet. If the ambient temperature is cold (i.e. in

Winter), the gasket may not ﬁt perfectly to the

cabinet. In that case, wait for the natural ﬁtting of

the gasket or accelerate this process by heating up

the part involved with a normal hairdrier.

Reversing the quick-freezing compartment door

(Fig. 5)

Unscrew the closing prong support (H).

Unscrew the two hinges (I) and remove the door.

Turn the closing prong support and ﬁx it to the

other side of the quick-freezing compartment.

Reverse the door and the hinges and mount them on

the other side of the compartment.

Check to see that the door closes correctly.

D276

Fig. 4

Fig. 5