Zanussi ZFC330WA Panduan Pengguna - Halaman 37

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembeku Zanussi ZFC330WA. Zanussi ZFC330WA 40 halaman. Chest freezer
Juga untuk Zanussi ZFC330WA: Panduan Pengguna (25 halaman)

Halaman Cetak

Problem

It is too cold inside the freezer

The appliance does not work at

all. Neither cooling nor lighting

works

Customer Service

If your appliance is still not working properly after mak-

ing the above checks, contact the nearest service centre.

To obtain fast service, it is essential that when you ap-

ply for it you specify the model and serial number of

your appliance which can be found either on the guaran-

tee certificate or on the rating plate located on the exter-

nal right side of the appliance.

Replacing the lamp

1. Disconnect the mains plug from the mains socket.

Possible cause

Products to be frozen are placed too

closely to each other

The lid has been opened often

The lid has been opened for a long

time.

The temperature is not set correctly.

Plug is not connected to the mains

socket properly

Power does not reach the appliance

The appliance is not switched on

The thermostatic control is not on

There is no voltage in the mains sock-

et (try to connect another appliance

into it)

Place the products in a way so that

cold air could circulate among them

Try to not open the lid often

Do not leave the lid open longer than

necessary

Set a warmer temperature

Connect the mains plug properly

Try connecting another electrical de-

vice to the power outlet

Switch on the appliance

Check setting of thermostatic control

Call an electrician

2. Replace the lamp with one of the same power and

specifically designed for household appliances.

(the maximum power is shown on the lamp cover)

3. Connect the mains plug to the mains socket.

4. Open the lid. Make sure that the lamp comes on.

Solution