Zanussi ZFT11105XA Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembeku Zanussi ZFT11105XA. Zanussi ZFT11105XA 16 halaman.

Halaman Cetak

WARNING!

This appliance must be earthed.

The manufacturer declines any

liability should these safety

measures not be observed.

The wires in the mains lead are coloured in

accordance with the following code:

• A - green and yellow: Earth

• C - brown: Live

• D - blue: Neutral

As the colours of the wires in the mains lead of

this appliance may not correspond with the

Technical information

Technical data

Height

Width

Depth

Rising time

Voltage

Frequency

The technical information are situated in the

rating plate, on the external or internal side of

the appliance and in the energy label.

Hours

Volts

coloured markings identifying the terminals in

your plug, proceed as follows:

1. Connect the wire coloured green and

yellow to the terminal marked either with the

letter "E" or by the earth symbol

coloured green and yellow.

2. Connect the wire coloured blue to the

terminal either marked with the letter "N" or

coloured black.

3. Connect the wire coloured brown to the

terminal either marked with the "L" or

coloured red.

4. Check that no cut, or stray strands of wire is

present and the cord clamp (E) is secure

over the outer sheath.

Make sure the electricity supply voltage is

the same as that indicated on the appliance

rating plate.

5. Switch on the appliance.

The appliance is supplied with a 13 amp fuse

(B). In the event of having to change the fuse in

the plug supplied, a 13 amp ASTA approved

(BS 1362) fuse must be used.

WARNING!

A cut off plug inserted into a 13 amp

socket is a serious safety (shock)

hazard. Ensure that it is disposed of

safely.

850

550

612

230 - 240