Zanussi ZFU20200WA Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembeku Zanussi ZFU20200WA. Zanussi ZFU20200WA 36 halaman.
Juga untuk Zanussi ZFU20200WA: Panduan Pengguna (16 halaman)

Halaman Cetak

Electrical connection

Before plugging in, ensure that the voltage

and frequency shown on the rating plate cor-

respond to your domestic power supply.

The appliance must be earthed. The power

supply cable plug is provided with a contact

for this purpose. If the domestic power supply

socket is not earthed, connect the appliance

to a separate earth in compliance with current

regulations, consulting a qualified electrician.

The manufacturer declines all responsibility if

the above safety precautions are not observed.

This appliance complies with the E.E.C. Direc-

tives.

Rear spacers

You can find the two spacers in the bag with

documentation.

Do these steps to install the spacers:

1. Release the screw.

2. Engage the spacer below the screw.

3. Turn the spacer to the right position.

4. Tighten again the screws.

Levelling

Accurate levelling prevents the vibration and

noise of the appliance during operation. To ad-

just the height of the appliance loosen or tight-

en the two adjustable front feet.

Door reversibility

Important! To carry out the following

operations, we suggest that this be made with

another person that will keep a firm hold on

the doors of the appliance during the

operations.

To change the opening direction of the door,

do these steps:

• Remove the plug from the power socket.

• Tilt back the appliance carefully so that the

compressor cannot touch the floor.

• Remove the plinth (1).

• Remove the cap (2) and position it on the

opposite side.

• Unscrew and remove the lower hinges. (3)