Directed Directechs DB3 Panduan Instalasi - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Elektronik Mobil Directed Directechs DB3. Directed Directechs DB3 20 halaman. Smart key for 2013 toyota highlander
Juga untuk Directed Directechs DB3: Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Manual (6 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (10 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (10 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (17 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman)

Halaman Cetak
Directed Directechs DB3 Panduan Instalasi

Quick Reference Guide

Sending commands to your vehicle
Whether you want to remote start the engine, lock/unlock the doors or pop the trunk,
there are 3 possible ways you can send commands to your vehicle, using the:
•
Factory remote.
•
Aftermarket remote.
•
Directed SmartStart application via your smartphone.
If applicable, you can also start the engine remotely by pressing the Lock button 3
times quickly on your factory remote.
Vehicle takeover with Get In and Go
Close the vehicle doors, hood and trunk, then press
1
the Remote Start button on the transmitter to start the
vehicle.*
Press the Unlock button on the factory or aftermarket
2
remote.*
Complete the following steps within 45 seconds or the vehicle will shut down.
Enter the vehicle, while making sure the factory
3
remote is inside with you.
Depress the brake pedal for a minimum of
3 seconds, put the car in gear and drive off.
4
For Manual Transmission, press and hold the clutch
first, then depress the brake pedal for a minimum
3 seconds.
* Icon and remote appearance may differ depending on the model purchased.
19
403.HONDA9 1.12 2014 Acura RLX (Smart Key)
© 2020-02-28 Directed. All rights reserved.
Get In and Go
Get In and Go is designed to provide users with easy takeover when entering their
Push-to-Start (PTS) equipped vehicle, once it has been remote started.
Typically, users would have to remote start their vehicle, then get inside and press
the PTS button to perform a takeover. There is therefore a physical action required
to drive away. With Get In and Go, you simply remote start the vehicle, unlock the
doors, get in and go... All that's left to do is put the gear in drive and drive off.
Pit stop/idle mode
Stop the vehicle in a safe parking spot and put the
1
gear in Park (P).
Press Remote
Start button*
Press the Remote Start button on the transmitter.*
2
The parking lights will flash once to indicate the
Press Unlock on
vehicle is now in Pit Stop Mode.
either remote*
It is safe to leave the engine running and exit the
vehicle with the factory remote in hand.
3
Note: We recommend that you always lock the
doors of your vehicle when leaving it unattended.
14:36
Enter vehicle
with remote
* Icon and remote appearance may differ depending on the model purchased.
Ready to
drive off
14:36
14:36
Put
gear in
Park
&
Parking lights flash x1
Press Remote
Start button*
14:36
Exit vehicle
with remote