Zanussi ZVF 200 RM Buklet Instruksi - Halaman 3

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Pembeku Zanussi ZVF 200 RM. Zanussi ZVF 200 RM 13 halaman.

Installation

During normal operation, the condenser and

compressor at the back of the appliance heat up

considerably. For safety reasons, minimum

ventilation must be as shown in the relevant

Figure.

Attention: keep ventilation openings clear of

obstruction.

If the appliance is transported horizontally, it is

possible that the oil contained in the compressor

ﬂows in the refrigerant circuit. It is advisable to

wait at least two hours before connecting the

appliance to allow the oil to ﬂow back in the

compressor.

There are working parts in this product which heat

up. Always ensure that there is adequate

ventilation as a failure to do this will result in

component failure and possible food loss. See

installation instructions.

Parts which heat up should not be exposed.

Wherever possible the back of the product should

be against a wall.

If the appliance has been transported horizontally,

it is possible that the oil contained in the

compressor ﬂows in the refrigerant circuit. It is

advisable to wait at least two hours before

connecting the appliance to allow the oil to ﬂow

back in the compressor.

Environment Protection

This appliance does not contain gasses which

could damage the ozone layer, in either its

refrigerant circuit or insulation materials. The

appliance shall not be discarded together with

the urban refuse and rubbish. Avoid damaging

the cooling unit, especially at the rear near the

heat exchanger. Information on your local

disposal sites may be obtained from your

municipal authorities.

The materials used on this appliance marked

with the symbol

are recyclable.