Zanussi ZHC 920 Panduan Petunjuk Pengoperasian - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Kap Ventilasi Zanussi ZHC 920. Zanussi ZHC 920 14 halaman.
Halaman Cetak2 - Fitting the fixing elements
a) Insert the rawl plugs provided into holes 1 and 2.
b) Fit the eye bolts O (fig. 6).
c) Fix the wall bracket S in hole 2 using the screw V provided (fig. 7).
6
O
8
K
A03_08
9
O
O
A03_09
B
7
1
V
A08_06
B
A03_10
10
3 - Fitting the hood canopy C to the
wall
a) Remove the metal grease filters
S
2
and the activated charcoal filter,
if there is any (see the paragraph on
Maintenance).
b) Fit the support rod B using the
two screws K (3,5x9,5) provided
A08_07
(fig. 8).
c) Hook the hood canopy C to the eye bolts
O fixed in holes 1 (fig. 9).
d) Adjust the support rod B so that it pushes
against the wall (fig. 10).
e) Adjusting position (fig. 11). There are two
adjustable hooks at the rear of the hood,
which can be used to adjust its position as
follows:
- Turn the screws L until the position of
screws N coincides with the lower access
holes.
- Turn the screws N to adjust the vertical and
horizontal position of the hood.
- Lock the screws L to fasten the hood
against the wall.
- Insert the plugs T provided in the holes
O
L
N
T
L
N
T
A08_11
15
giving access to screws N.
L
N
11