Zanussi ZHC 920 Panduan Petunjuk Pengoperasian - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Kap Ventilasi Zanussi ZHC 920. Zanussi ZHC 920 14 halaman.

2 - OPERATION

Control panel (fig. 27)

The cooker hood can be operated as follows:

SWITCH L

= controls the worktop

illumination;

SWITCH V1 = controls the fan speed for low

speed, should be selected when

simmering or using only one

pan: the noise level is kept to the

minimum.

SWITCH V2 = medium speed, should be

selected for normal cooking. This

speed offers the best ratio between air capacity and noise level.

SWITCH V3 = top speed, should be selected when frying or cooking food with strong odours, even

for a long period.

Constant maintenance is a guarantee for long-lasting working order and efficiency.

Special care should be taken of the metal antigrease filter and activated carbon filter (for filter hoods

only).

3.1 - Metal antigrease filters

1 - Cleaning

It is necessary to wash these filters at least every two

months with a normal detergent; their compact size

enables them to be washed also in dishwasher.

2 - Replacement

The metal grease filters panels are easily removed, one

at a time, by applying slight inward pressure to the

actuators to release the securing bolts (fig. 28). Care

should be taken to support the filter with one hand

while releasing the securing bolts with the other hand.

1 - How they work

The activated carbon filter can hold odours until it

reaches total saturation. It is not washable nor can it

be re-used, but should be changed at least every 4

months or more often in case of intensive use.

2 - Replacement

Remove the antigrease filters and the activated

carbon filter from its seat by acting on the hooks

(fig. 29). Fit the new activated carbon filter and

the metal antigrease filters.

A03_27