Zanussi ZHC4284 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kap Ventilasi Zanussi ZHC4284. Zanussi ZHC4284 44 halaman. Zanussi chimney hood product brochure
Juga untuk Zanussi ZHC4284: Fitur (5 halaman)

Halaman Cetak

It is dangerous to alter the specifications or attempt to modify this product in any way.

Technical Information

DIMENSIONS

ELECTRICAL SUPPLY:

��

The symbol

on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed

over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you

will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste

handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste

disposal service or the shop where you purchased the product.

THIS APPLIANCE MUST BE EARTHED

Electrical Requirements

Any permanent electrical installation must comply with

the latest I.E.E. Regulations and local Electricity Board

regulations. For your own safety this should be under-

taken by a qualified electrician e.g. your local Electricity

Board, or a contractor who is on the roll of the National

Inspection Council for Electrical Installation Contracting

(NICEIC).

Electrical Connection

Before connecting to the mains supply ensure that the

mains voltage corresponds to the voltage on the rating

plate inside the cooker hood.

INSTALLATION INSTRUCTIONS

HEIGHT OF CANOPY:

HEIGHT OF CHIMNEY:

WIDTH OF CANOPY :

DEPTH OF CANOPY:

VOLTAGE:

POWER CONSUMPTION:

FAN MOTOR:

LAMPS : (4 x 20 W)

Note: CE Marking certifies that this appliance complies with the requirements

laid down in EEC directive 89:336. (Electromagnetic compatibility) and

subsequent modifications and Low Voltage directive 72/23/E.

ELECTRICAL CONNECTIONS

(UPPER SECTION) 460 mm

(LOWER SECTION) 750 mm

This appliance is fitted with a 3 core mains cable and

must be permanently connected to the electricity supply

via a double-pole switch having 3mm minimum contact

gap on each pole. A Switched Fuse Connection Unit to

BS1363 Part 4, fitted with a 3 Amp fuse, is a recom-

mended mains supply connection accessory to ensure

compliance with the Safety Requirements applicable to

fixed wiring instructions.

This appliance conforms to BS 800: 1988 and EEC

Directive No. 78 308 regarding suppression of radio and

television interference.

750 mm

448 mm

483 mm

220-240 V 50Hz

410 W

330 W

80 W