Zanussi ZHC72X Petunjuk Pengoperasian dan Pemasangan - Halaman 11
Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Kap Ventilasi Zanussi ZHC72X. Zanussi ZHC72X 16 halaman. Zanussi instructrion manual ventilation hood zhc72x
Halaman Cetak
6
Make the electrical connection.
Assembling the telescopic flue
(fig. 7)
Fix the lower bracket (D) onto the
apparatus. Fix the upper bracket (E) into
the ceiling; in order to position the bracket
on the same access as the apparatus,
refer to the small triangle (F) that is on the
central axis.
Take the two telescopic pipes,
remembering that you have to slightly lift
the smaller pipe (the lower one); insert the
pipes from the front expanding slightly with
your hands so that they can be hooked
onto the two brackets.
Fix the pipes to the brackets using screws
G and H.
INSTALLATION INSTRUCTIONS
7
Wall cupboard fitting
Make four holes in the bottom of the wall
cupboard and if operating the hood in the
ducting mode, cut the air venting hole. If
the hood is to be used in the filtering
mode, this is not necessary.
Fix the hood to the bottom of the cupboard
using the four screws supplied (fig.8).
8
11