Zanussi ZHP 631 Buku Panduan Pemasangan, Penggunaan, dan Pemeliharaan - Halaman 13
Jelajahi secara online atau unduh pdf Buku Panduan Pemasangan, Penggunaan, dan Pemeliharaan untuk Kap Ventilasi Zanussi ZHP 631. Zanussi ZHP 631 40 halaman.
Juga untuk Zanussi ZHP 631: Panduan Pemasangan & Penggunaan (11 halaman), Buku Petunjuk (40 halaman)
Halaman Cetak
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to
the chimney using either a flexible or rigid pipe ø120
mm, the choice of which is left to the installer.
• Fix the pipe in position using sufficient pipe clamps
(not supplied).
• Remove any activated charcoal filters.
RECIRCULATION VERSION AIR OUTLET
• Cut a hole ø 125 mm in any shelf that may be posi-
tioned over the hood.
• Connect the flange to the outlet on the shelf over the
hood using a flexible or rigid pipe ø120 mm.
• Fix the pipe in position using sufficient pipe clamps
(not supplied).
• Fix the directional grille 8 on the recirculation air
outlet using the 2 screws 12e (2,9 x 9,5) provided.
• Ensure that the activated charcoal filters have been
inserted.
• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3
mm.
• When opening the sliding carriage for the first time after installing the hood, pull it out
briskly until it clicks.
EN
Downloaded from www.vandenborre.be
Connections
ELECTRICAL CONNECTION
ø 120
12e
8
8
125
125
9
9
1
13
3