Zanussi ZHP 631 Buku Petunjuk - Halaman 13

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Kap Ventilasi Zanussi ZHP 631. Zanussi ZHP 631 40 halaman.
Juga untuk Zanussi ZHP 631: Panduan Pemasangan & Penggunaan (11 halaman), Buku Panduan Pemasangan, Penggunaan, dan Pemeliharaan (40 halaman)

Connections

Ducting Version AirExhaust System

When installing the hood in ducting version, a rigid or

a flexible pipe with the diameter corresponding to the

flange diameter is used in order to connect the hood

to the air outlet piping.

• Fix the pipe with an adequate quantity of pipe clamps

(not supplied).

• Remove possible charcoal filters.

Recirculation Version AireOutlet

• Cut a hole ø 125 mm in any shelf that may be posi-

tioned over the hood.

• Insert the flange 10a on the hood body outlet.

• Connect the flange to the outlet on the shelf over

the hood using a flexible or rigid pipe ø120 mm.

• Fix the pipe in position using sufficient pipe clamps

(not supplied).

• Fix the directional grille 8 on the recirculation air outlet

using the 2 screws 12e (2,9 x 12,7) provided.

• Ensure that the activated charcoal filters have been

inserted.

Electrical Connection

• Connect the hood to the mains through a two-pole

switch having a contact gap of at least 3 mm.

• When opening the sliding carriage for the first time

after installing the hood, pull it out briskly until it

clicks.

��

�

��

�