Zanussi 7332543286072 Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kompor Zanussi 7332543286072. Zanussi 7332543286072 20 halaman.
Juga untuk Zanussi 7332543286072: Panduan Pengguna (24 halaman), Panduan Pengguna (24 halaman), Panduan Pengguna (20 halaman), Panduan Pengguna (24 halaman)

Halaman Cetak

Burner

Normal

power

3,00

Gas Connection

Choose fixed connections or use a flexible pipe

in stainless steel in compliance with the regula-

tion in force. If you use flexible metallic pipes,

be careful they do not come in touch with mo-

bile parts or they are not squeezed.

Flexible nonmetal pipes connection

If it is possible to easily and fully control the gas

connection, you can use a flexible pipe. You

must tightly attach the flexible pipe by clamps.

To install, use a pipe holder. Make sure that you

tightly attach the pipe holder to the gasket, and

then continue with the gas connection. The

flexible pipe is correct when:

– It cannot become hotter than room tempera-

ture or higher than 30 °C.

– It is no longer than 1500 mm.

– It does not compress.

– It is not subject to traction or torsion.

– It does not make contact with sharp edges or

corners.

– You can easily examine it in order to check

its condition.

To preserve the flexible pipe, you must regularly

check if:

– It does not show cracks, cuts or burn marks

on the two ends and its length.

– The material is correctly elastic and not hard-

ened.

– The fastening clamps are not rusted.

– It is not expired.

If you can see one or more defects, do not re-

pair the pipe, but replace it.

Important! After installation is complete, use a

soapy solution and never a flame to see if you

sealed all the pipe fittings perfectly.

The gas supply ramp is on the rear side of the

control panel.

Reduced

Type of gas

power

0,72

Propane G31

Pressure

mbar

Warning! Before gas connection

disconnect the mains plug from the

mains socket or switch off the fuse in the

fuse box. Close the primary valve of the

gas supply.

B C

A) Gas connection point (only one point is ap-

plicable for appliance)

B) Gasket

C) Adjustable connection

D) LPG pipe holder

E) Natural Gas pipe holder

The appliance is set to default gas, to

change the setting choose pipe holder

from the list. Always use the gasket sealing.

Adjustment to different types of gas

Warning! Let only an authorized person

do the adjustment to different types of gas.

This appliance is for operation with natural

gas.

With the correct injectors, you can also operate

it with liquid gas.

Warning! Before replacing the injectors,

make sure that the gas knobs are in the

Off position and disconnect the appliance from

the electrical supply. Let the appliance cool off

fully. There is a risk of injury.

Injector di-

Usage

ameter

g/h

0,88

214,24