Zanussi ZCG43330WA Panduan Pengguna - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kompor Zanussi ZCG43330WA. Zanussi ZCG43330WA 28 halaman.

Halaman Cetak
D
Minimum distances
Dimension
A
650
B
150
C
2
D
400
E
450
F
less than 400
Levelling of the appliance
Gas burners
BURNER
Auxiliary
22
A
E
B
C
mm
NORMAL POWER
kW
1
Use small feet on the bottom of appliance to set
the appliance top surface level with other
surfaces.
The stability chain
CAUTION!
Install the stability chain to prevent
the appliance from tilting. The
F
stability chain only works when the
appliance is put in a correct area.
1. Measure down 180 mm from the appliance
top surface, then measure right 30 mm.
2. Mark the position of the wall and this gives
anchor point for the stability chain.
Other technical data
WARNING!
These instructions are only valid in
the countries whose symbols appear
on this booklet's cover.
Gas cate-
gory:
Gas supply G20 (2H) 20 mbar
INJECTOR MARK 1/100 mm
70
180 mm
30 mm
I2H
Natural Gas
www.zanussi.com
Btu/h
3412