Alecto DBX-85MT Panduan Pengguna - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Bayi Alecto DBX-85MT. Alecto DBX-85MT 20 halaman.

TROUBLESHOOTING

PROBLEM:

LED

flashes

LED

flashes +

attention tones

from parent unit

Cannot hear

sound or baby

cry from the

parent unit

The sound on

the parent unit is

interrupted

High-pitched

tone

In case the babyphone still does not operate correctly, please disconnect

the power adapters and remove the batteries. Wait for some minutes

and install batteries and connect the power adapters again. In case the

malfunction still persists, please contact your dealer.

POSSIBLE SOLUTION:

• The parent unit and the baby unit may be out of

range with each other. Reduce the distance between

the units.

• The baby unit may be switched off. Press POWER-

key to switch on the baby unit.

• Lost connection with the baby unit. Reduce the dis-

tance between the parent unit and the baby unit.

• The baby unit may be switched off. Press POWER-

key to switch on the baby unit.

• Rechargeable batteries in baby-unit are empty.

Connect the baby unit to the mains power with the

supplied power adaptor for recharging.

• The volume level in the parent unit may be set too

low, increase the volume level of the parent unit.

• The microphone sensitivity level (VOX) of the baby

unit may be set too low. Increase the sensitivity level

of the baby unit.

• The parent unit and the baby unit are too close to

each other. Make sure the parent unit and baby unit

are at least 1.5 metre away from each other.

• The speaker volume of the parent unit maybe set too

high. Decrease the volume of the parent unit.