Alecto DBX-93 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Bayi Alecto DBX-93. Alecto DBX-93 13 halaman.

INSTALLATION

POWER SUPPLY:

The baby unit is powered by the supplied, fixed power adaptor. Plug

this connector into a 230V wall socket.

POSITIONING:

Place the baby unit in the baby room. We recommend you to maintain

a distance of at least 2 meters between the baby and baby unit.

Always make sure that the baby cannot reach the baby unit or adaptor

cable.

WALL-MOUNTING:

The baby unit can also be mounted to a wall by using the keyhole

opening at the rear of the unit.

USE

POWER ON/OFF:

Slide the power switch at the right side to the '1' position to turn on the

baby unit. Slide this switch to the '0' position to turn off the baby unit.

CHANNEL & SUB-CHANNEL:

Check whether the baby unit and your babyphone are set to the same

channel and sub-channel. Refer to the next page if this setting must be

changed in the baby unit.

As soon as the baby unit detects any sound, the transmitter is acti-

vated and the sound will be transmitted to your babyphone.

SENSITIVITY:

Use the rotary VOXSENS control at the rear of the baby unit to adjust

the sensitivity level. When turned fully anti-clockwise, you set the low-

est level, fully clockwise is the highest sensitivity level.