Clarke SEV11C100 Petunjuk Pengoperasian & Pemeliharaan - Halaman 13
Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian & Pemeliharaan untuk Kompresor Udara Clarke SEV11C100. Clarke SEV11C100 16 halaman. Air compressor electric motor driven
Juga untuk Clarke SEV11C100: Panduan Petunjuk Pengoperasian & Pemeliharaan (17 halaman)
Halaman Cetak
SYMPTOM
Condensation at outlet Piping installation incorrect.
points.
Electric Motor too hot:
maximum temperature Faults in electrical installation
90 C (194 F).
Machine running but
not pumping air into
receiver (10 HP and
above).
Spare Parts and Service
For spare parts and service, please contact your nearest dealer, or
Clarke International, on one of the following numbers.
PARTS & SERVICE TEL.: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
PARTS: [email protected]
SERVICE:
PROBABLE CAUSES
Compressor taking in air
which is too warm.
Delivery temperature of air
from air receiver too high.
Operational voltage too low.
Cooling fins of electric motor
blocked by dirt.
Air exhausting from solenoid
after starter has changed from
star to delta.
or
e-mail as follows:
Consult your local dealer.
Obtain better fresh-air
supply for compressor.
a) Use a larger air receiver.
b) Contact Clarke Service
Call an electrician.
Contact Clarke Service
Department
Clean cooling fins.
Check solenoid valve.
Contact Clarke Service
Department
13
REMEDY
Department.