AFS SIO2SD Panduan Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Aksesori Permainan Video AFS SIO2SD. AFS SIO2SD 2 halaman.

Halaman Cetak
From the version 2.0 device started with K4 pressed goes to setup mode. In this mode keys have
meaning as follows:
K1: next option
•
SHIFT+K1: previous option
•
K2: next option setting
•
SHIFT+K2: previous option setting
•
SHIFT+K3: firmware upgrade
•
Options:
Sio high speed
•
– off
– hsindex from 1 to 16 (6 is the default setting)
Cfg tool load (when to override D1 to load configuration program)
•
– never
– startup+shift - only when SHIFT was pressed during startup (power on)
– every startup
– no card - only if SD card is not inserted (default setting)
– shift pressed - SHIFT always cause D1 override (tested on every SIO 'S' command on
D1 - available from version 2.2)
LED mode (Led lights are optional and in most unit are not assembled.)
•
– SD read/write - first LED shows SD reads, second LED shows SD writes
– SIO read/write - first LED shows SIO reads, second SIO writes
– SD act/SIO act - first LED shows any SD activity, second any SIO activity
Device id (number of device for SIO2SD.XEX - available from version 2.2)
•
– values from 0 to 3
Write protect (write protection in ATR files - available from version 2.2)
•
– never - ATR's are always R/W (write protect flag ignored)
– obey ATR flag - obey ATR write protect flag - default
– always - ATR's are always R/O
SIO2SD connector
Connecting SIO2SD to Atari SIO
ATARI SIO port
1
2
3
4
5
Atari Fan Store
http://afs.atari.org
Signal description
10
+5 V
4
GND
7
COMMAND
3
DATA IN
5
DATA OUT