Blackberry ITC100-1 Panduan Instalasi - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Radar Blackberry ITC100-1. Blackberry ITC100-1 28 halaman. Dry van, insulated trailers roll-up doors
Juga untuk Blackberry ITC100-1: Panduan Instalasi (33 halaman), Panduan Instalasi (26 halaman), Panduan Instalasi (32 halaman), Panduan Instalasi (33 halaman), Panduan Instalasi (35 halaman), Panduan Instalasi (28 halaman), Panduan Instalasi (34 halaman), Panduan Instalasi (35 halaman), Panduan Instalasi (30 halaman), Panduan Instalasi (35 halaman), Buku Petunjuk (33 halaman), Panduan Instalasi (32 halaman), Panduan Instalasi (26 halaman), Panduan Instalasi (25 halaman), Buku Petunjuk (35 halaman)

BLACKBERRY RADAR H2 ITC100-1, ITC100-2, ITF100-1 INSTALLATION GUIDE

When looking for an installation location, if you are considering installation on a frame rail

within an overhang, it is recommended to choose an installation location with a minimum

clearance of 1/4" (6 mm) above and below the module. Maintaining this minimum

clearance improves antenna performance. In some cases, as when installing on narrow

width "C-channel" frame rails, it may be beneficial to mount the module on the opposite

side of the frame rail to achieve the recommended clearance.

Low Clearance

Not Recommended

1. As indicated in Section 3.3 of this guide, record the module identifier and the asset

identifier the module will be paired with. For your convenience, you may quickly create a

record of the module and asset identifier pairings by removing the partially attached label

from the inner housing of the module and placing it on the installation worksheet, next to

the asset that will be tracked by this module.

FLATBED AND HEAVY EQUIPMENT

Good Clearance

Recommended

Outside Installation

Recommended