Blackberry ITC100-1 Panduan Instalasi - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Radar Blackberry ITC100-1. Blackberry ITC100-1 28 halaman. Dry van, insulated trailers roll-up doors
Juga untuk Blackberry ITC100-1: Panduan Instalasi (33 halaman), Panduan Instalasi (26 halaman), Panduan Instalasi (32 halaman), Panduan Instalasi (33 halaman), Panduan Instalasi (35 halaman), Panduan Instalasi (28 halaman), Panduan Instalasi (34 halaman), Panduan Instalasi (35 halaman), Panduan Instalasi (30 halaman), Panduan Instalasi (35 halaman), Buku Petunjuk (33 halaman), Panduan Instalasi (32 halaman), Panduan Instalasi (26 halaman), Panduan Instalasi (25 halaman), Buku Petunjuk (35 halaman)

BLACKBERRY RADAR H2 ITC100-1, ITC100-2, ITF100-1 INSTALLATION GUIDE

Battery replacement

The BlackBerry Radar H2 batteries are designed to provide long life between battery

replacement intervals. When replacing your battery, we recommend the application of Silicone

Based O-Ring Lubricant to the O-Ring during each battery replacement cycle.

One tube of Silicone Based O-Ring Lubricant is included with each box of Replacement Batteries

ordered through BlackBerry. Each tube contains enough lubricant to service 10 devices.

Silicone O-ring Lubricant

1. Insert the replacement battery into the battery compartment.

2. Connect the battery cable to the battery connector. The LED will blink to indicate the

module is active. NOTE: It can take between 20-30 seconds for the blink sequence to

begin. Please be patient. Once you see the LED blink, continue to the next step.

IMPORTANT: When connecting the battery cable to the battery connector, do not

remove the Battery Connector Retaining Foam Retaining Tab or place the tab outside of

LED

FLATBED AND HEAVY EQUIPMENT

Silicone O-ring Lubricant