Directed Directechs DB3 Panduan Instalasi - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Dengan kunci Directed Directechs DB3. Directed Directechs DB3 20 halaman. Smart key for 2013 toyota highlander
Juga untuk Directed Directechs DB3: Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Manual (6 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (10 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (10 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (17 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman)

Halaman Cetak

Directed Directechs DB3 Panduan Instalasi

Module programming

Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.

Wait until the LED turns ON solid red.

Note: To skip the transponder programming and use convenience features only, press the

programming button 5 times.

Important! Ensure that all keyfobs except one is located a minimum of 10 feet (3 meters)

away from the vehicle BEFORE proceeding with the next step.

Note: This step is required for programming only.

Remove the backup key from the transmitter. Open the transmitter, and remove the battery.

Place and hold the keyfob in front of Push-to-Start (PTS) button.

Important! Hold it there for steps 6 to 8.

Press the PTS button twice to turn the ignition ON, and wait for the key light to start flashing.

Press and hold the brake pedal until the LED starts flashing orange slowly, then release the

pedal slowly.

Press the PTS button once more to turn the ignition OFF.

Remove the module from the vehicle and reconnect it to your computer. The web site will

automatically recognize that you are moving onto the second phase of the programming

sequence.

Click on Submit Key2GO Request.

Once the configuration is completed, reconnect the module. The LED turns ON solid green for

3 seconds, then turns OFF.

You have successfully completed the module programming sequence.

403.NISS4HT 2.36 2023 Nissan Armada (Smart Key)