Blackberry Radar H2 Panduan Instalasi - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Radar Blackberry Radar H2. Blackberry Radar H2 28 halaman. Dry van, insulated trailers roll-up doors
Juga untuk Blackberry Radar H2: Panduan Instalasi (33 halaman), Panduan Instalasi (26 halaman), Panduan Instalasi (25 halaman), Panduan Instalasi (32 halaman), Panduan Instalasi (30 halaman), Panduan Instalasi (33 halaman), Panduan Instalasi (34 halaman), Panduan Instalasi (35 halaman), Buku Petunjuk (33 halaman), Panduan Instalasi (32 halaman), Panduan Instalasi (26 halaman), Panduan Instalasi (25 halaman)

BLACKBERRY RADAR H2 ITC100-1, ITC100-2, ITF100-1 INSTALLATION GUIDE

Drilling tips for chassis and frame installations

Due to the thicker, harder steel used on chassis and trailer frames, you may wish

to follow these suggestions.

Tip 1: To shorten drilling time and prolong the life of your drill bit, you may wish

to use cutting tool lubricant during the drilling process.

Tip 2: For most precise hole drilling, before drilling your hole, you may wish to

use a punch and hammer to help place the drill bit. This will prevent the bit from

"walking" during the drilling operation.

4. Remove the template. If there are any burrs around the holes, remove them. Also,

remove any dust or debris left over from the drilling or de-burring operations.

5. Place the module on the chassis, aligning the holes on the module with the holes you

drilled into the asset.

FLATBED AND HEAVY EQUIPMENT