Clarke 6500403 Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Sander Clarke 6500403. Clarke 6500403 15 halaman. Belt/disc sander
Halaman Cetak
Assembly
1. Belt Table
•
Gently ease the table into place with
the belt support entering the slot in
the table.
•
Screw the Table Locking Lever into
place, ensuring a flat washer is used
on the levers' threads noting that
the locking lever has a LEFT HAND
thread, i.e. turn anticlockwise to
tighten.
2. Disk Table
2
•
Slide the table pegs (Fig 2) into
the slots in the Upper Disk Cover
(Fig. 3) to the extent that the
Locking Levers can be screwed
in as shown in Fig. 4, ensuring flat
washers are used on the locking
lever threads
1
3
8
4