aleen Music Tel-240 Panduan Instalasi dan Pengoperasian - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Telepon aleen Music Tel-240. aleen Music Tel-240 20 halaman.

3.1

Recording on a Music Channel

To record music on the MusicTel-240, a special recording cable is used

(provided). Recording new music can only be performed on an empty channel,

provided the memory is not full. Erasing instructions are given in section 3.2 of

this manual.

Note: make sure the Memory Module is properly inserted into the MusicTel-240.

1. Plug the 9VDC adapter jack into the MusicTel-240 power supply connector.

Next, connect the 9VDC adapter to the mains.

Connect the recording cable to the RJ-11 socket on the front panel of the

MusicTel-240 (see Figure 2-2). The device is automatically switched to

Recording Mode. Next, connect the other end of the Recording Cable to the

music source device (CD player, tape etc.), as described in Figure 3-1.

Once the Recording Cable is inserted, the LED of channel 1 is lit. A flashing

LED indicates the selected channel is not recorded, while a constantly lit LED

indicates the selected channel is recorded.

3. Select a channel to be recorded by pressing its button. The LED of the

selected channel will start flashing.

4. Press the "

and the selected channel's LED are lit.

MusicTel-240 Installation and Operation Manual

rec

" button on the top panel of the MusicTel-240. The "rec" LED

Installation and Operation

3-2