Clarke EZ-8 Operasi dan Keselamatan - Halaman 2
Jelajahi secara online atau unduh pdf Operasi dan Keselamatan untuk Sander Clarke EZ-8. Clarke EZ-8 2 halaman. Drum sander
Juga untuk Clarke EZ-8: Panduan Operator (20 halaman)
Halaman Cetak
EZ-8 Drum Sander
Questions or Problems?
Contact Clarke
Technical Service at
800-356-7274.
Need more
information?
The instructions on this
sheet are abbreviated
instructions only and are
provided solely as a
customer service. They
are not meant to replace
the tool's operation
manual. If you are
unsure of the tool's safe
and proper operation,
please request an
operator's manual from
one of our sales
associates.
Step
Safety Tips:
Step
1
Press selector switch to off (O) position and
disconnect power supply when changing
4
abrasive.
2
Empty dust bag when it is 1/3 full. Sanding dust
can spontaneously ignite and cause fire or
explosion.
3
Inspect power cable for abrasion and replace
when needed.
Care and Maintenance:
Step
1
Periodically blow out dust from sanding
chamber.
2
Periodically remove debris from truck and caster
wheels.
5
3
Remove dust bag from machine and shake
thoroughly to remove sanding dust.
4
Turn bag inside out and machine wash in cold
water to maintain dust recovery.
5
Periodically check drive belts for fraying and
broken cogs. Realign affected belt.
6
Periodically check bearings for wear and
lubricate according to the owners manual.
Action
READ AND FOLLOW DIRECTIONS IN
OWNERS MANUAL
Action
Action